Nearly 140,000 cars have been recalled! Involved in importing Audi A8, Volvo XC60, etc.

　　Sino-Singapore Jingwei Client, September 4th. The State Administration of Market Supervision and Administration issued recall information on the 4th, showing that six automakers recalled 138,929 vehicles, involving imported Audi A8 and S8, imported XC60 cars, etc.

FAW-Volkswagen recalls 2,854 imported Audi A8 and S8

　　The recall information shows that FAW-Volkswagen Automobile Co., Ltd. has decided to recall some imported 2013, 2015, 2016 and 2017 Audi models produced from June 15, 2012 to October 5, 2017 from September 25, 2020. A8 and S8 cars, totaling 2,854 units.

　　The sealing strips of the engine compartment seals of vehicles within the recall range may be deformed due to high temperature. During the operation of the vehicle, the engine compartment seals may be deformed or loose.

When the vehicle vibrates during operation, the loose engine compartment seals may come into contact with high-temperature components in the engine compartment, which may cause the seals and adjacent components in the engine compartment to become too hot. In extreme cases, they may catch fire and pose safety hazards. .

FAW-Volkswagen Automobile Co., Ltd. will entrust Audi authorized dealers to install fixing plates for vehicles within the recall range free of charge to prevent engine compartment seals from loosening and eliminate potential safety hazards.

Zhejiang Haoqing and others recall 135,316 XC60 cars

　　The recall information shows that Volvo Car Sales (Shanghai) Co., Ltd. and Zhejiang Haoqing Automobile Manufacturing Co., Ltd. have decided to recall the following vehicles from September 4, 2020, totaling 135,316.

Among them, Zhejiang Haoqing Automobile Manufacturing Co., Ltd. will recall the 2018-2020 domestically produced XC60 vehicles produced from May 20, 2017 to May 27, 2020, a total of 135,162; Volvo Car Sales (Shanghai) Co., Ltd. will recall May 2017 A total of 154 imported XC60 cars of the 2018-2020 model year produced from 20th to May 27th, 2020.

　　For some vehicles within the recall range, due to design reasons, the installation parameters of the front windshield wiper arm nut were set incorrectly, resulting in insufficient tightening torque.

Due to the torque deviation of the front windshield wiper arm nut, the nut may loosen.

When the problem occurs, if you continue to use the front windshield wiper, the wiper arm may wear out.

If the front windshield wiper arm touches the hood, abnormal noise may occur.

In extreme cases, the front windshield wiper function may be reduced or even lost, which may affect the line of sight, increase the risk of accidents, and pose safety hazards.

Mitsubishi Motors recalls some imported Lancer, Pajero and Delica cars

　　The recall information shows that Mitsubishi Motors Sales (China) Co., Ltd. has decided to recall some imported Lancer, Pajero and Delica vehicles produced between April 8, 1996 and September 25, 1999, starting from November 1, 2020. 482 vehicles.

　　The vehicles within the scope of the recall have incomplete moisture-proof measures for the non-sodium azide-containing gas generator (NADI type) of the airbag due to manufacturing defects of the supplier.

Affected by repeated changes in temperature and humidity during use, the gas generating agent may deteriorate due to moisture, which may cause the airbag to fail to deploy normally. When the airbag is deployed, the gas generator may be abnormally damaged, causing fragments to fly out, injuring the occupants in the vehicle. Security risks.

Mitsubishi Motors (China) Co., Ltd. will replace airbag inflators made by other manufacturers for vehicles within the scope of the recall to eliminate potential safety hazards.

Jiangnan Automobile recalls 270 Yun100 vehicles

　　The recall information shows that Hunan Jiangnan Automobile Manufacturing Co., Ltd. has decided to recall some of the Yun 100 vehicles produced between November 10, 2015 and November 17, 2015, a total of 270 vehicles from September 4, 2020.

　　Due to the manufacturer’s manufacturing reasons for the power batteries on some vehicles within the recall range, the BMS low-voltage wiring harness collection terminals were not fully locked.

It may lead to loose collection terminals, inaccurate voltage collection, overcharge during charging, and battery cell failure.

When the vehicle is driving, charging or parking, there may be a risk of fire and potential safety hazards.

Hunan Jiangnan Automobile Manufacturing Co., Ltd. will replace the power batteries for vehicles within the scope of the recall free of charge to eliminate potential safety hazards.

Changfeng Automobile recalls 7 Cheetah cars

　　The recall information shows that GAC Changfeng Automobile Co., Ltd. has decided to recall part of the Cheetah vehicles produced from August 1, 1997 to August 1, 1998, starting from November 1, 2020, a total of 7 vehicles.

　　Vehicles within the recall range have incomplete moisture-proof measures for airbags containing non-sodium azide gas generators (NADI type) due to supplier manufacturing defects.

Affected by repeated changes in temperature and humidity during use, the gas generating agent may deteriorate due to moisture, which may cause the airbag to fail to deploy normally. When the airbag is deployed, the gas generator may be abnormally damaged, causing fragments to fly out, injuring the occupants in the vehicle. Security risks.

GAC Changfeng Automobile Co., Ltd. will replace airbag gas generators produced by other manufacturers for vehicles within the scope of the recall to eliminate safety hazards.

(Zhongxin Jingwei APP)