Smartphone repair is expensive, and in some high-end phones, screen repair may exceed $ 170, but you don't have to pay all that as long as you can replace it yourself after purchasing the necessary tools online:
Canada's CanalV.com site shows how to do this after buying the right tools online at a price not exceeding $ 39. Of course, this equipment varies depending on the type of phone, and in this experiment repaired the phone iPhone 6:
Required tools:
- Screen that will replace the broken screen.
- Screwdriver.
- Suction.
- Tool to remove broken screen.
- tongs.
- Adhesive mold to pick up small screws so as not to get lost.
Implementation steps:
Unscrew the two screws at the bottom of the phone with a cross screwdriver, and place them in a mold to preserve them. Place the suction device just below the screen, just above the main button, and use a metal tool to slide on the screen. You can then remove the screen with this widget by moving the cell, except the top. You should do this carefully to prevent the screen from breaking into small pieces before you lift it. With a small screwdriver, remove the small metal plate that hides the connectors, and remove 3 screws depending on the forceps. After that, remove the plate. Gently remove the connectors with the forceps to separate the display from its base. At the top of the screen, remove 3 screws from the metal plate that holds the inner earpiece. With forceps, gently remove the plate. Gently remove the internal earpiece using the clamp. Remove and save the front camera. For the main button, we must unscrew the small screws that support it before removing the small board. Next, you must remove another 5 Prague: two on the sides of the phone (two screws on the left side and two screws on the right side) and the fifth screw next to the main button. You can now remove the metal plate that protects the LCD screen from your phone. Last thing, remove the main button. You can get rid of the broken screen. It can take the new screen and remove the protection filter. |
| Repair tools and methods vary depending on the phone, and you have to look for tools appropriate to the quality of your phone (Bixby) |
Installing the new screen:
Repeat all the above steps in the opposite direction:
Replace the metal plate that protects the display, and return the four screws on each side and the fifth on the bottom, with the main button also reset. Place the button (be careful and place it in the center of the slot completely), cover it with a small metal plate, and secure the two screws. Replace the front camera, the inner earpiece, and place the screw plate that protects it with three screws. All that remains is to reconnect the remaining two parts, and connect the monitor to the battery. Gently reconnect the three connectors at the top without using force. Replace the motherboard that protects the connectors via 3 Prague. Before you close your phone, make sure it is turned on. Switch the phone off by pressing all parts and reinsert the two screws at the bottom of the cell. Test the phone to see if everything works, including the screen, camera and main button. Using this method, you can save between $ 56 to $ 130 in screen repair.
