There are detailed specifications for the body marking settings
It shall not be installed on the roof of the car glass; it shall not pass through the front and rear of the car; it shall not use luminous reflective materials for electronic screens
Our reporter Zhang Nan
In order to standardize the behavior of setting the name, enterprise logo, telephone, address, website and other signs of the company in this city's motor vehicle and non-motor vehicle body spraying, pasting, etc. Norms (Draft for Comments)" to solicit opinions from the society.
In the future, no signs will be placed on the window glass, front and rear windshields, and the roof; the body signs will not be allowed to use luminous, reflective materials or electronic display devices, let alone block the number plate.
Comments are available until June 2.
Non-buses are not allowed to have body advertisements
The body logo cannot be set casually.
According to the draft for comments, the installation of body signs on motor vehicles and non-motor vehicles shall comply with the national and municipal traffic safety and vehicle management requirements.
The vehicle body logo shall be designed in combination with the vehicle body as a whole.
The specification proposes that, except for buses and trams on fixed operating routes of public transport, other vehicles shall not set up outdoor advertisements on their bodies.
For takeaway, express delivery and other body markings, the takeaway and express delivery enterprises shall formulate a body marking setting plan, and organize and standardize the setting.
The unilateral logo shall not be larger than 1/3 of the main body
The vehicle body signs shall not be set to affect the driving safety and vehicle identification.
For example, from the point of view of location, the body logo shall not be placed on the window glass, the front and rear windshields and the front of the body; it shall not be placed on the top of the vehicle; it shall not adopt a through design from the front to the rear of the vehicle; it shall not block the vehicle number plate or identification number; It also must not affect the use of vehicle engine cooling vents, air intakes, and air conditioning air intakes.
It is suggested that small vehicles should be installed on the left and right sides of the vehicle body, and medium or large vehicles can be installed at appropriate positions on the left and right sides and rear of the vehicle body according to the actual situation of the vehicle body.
There are also restrictions on the material of the body markings, etc.
For example, no luminous or reflective material settings; no electronic display devices.
There are also strict regulations on the area of vehicle body signs.
For example, the overall area of a unilateral logo shall not be larger than 1/3 of the color area of the body on that side; the font size shall not be larger than 10% of the body height; a single text or character shall not be set across the door, etc.
The non-motor vehicle body logo is set at the frame part, and the font size needs to be coordinated with the overall proportion of the vehicle.
Supervised and inspected by urban management law enforcement
The draft for comments proposes that the installers of the body signs should conduct daily maintenance and management of the signs, and if the signs are found to be discolored, dirty, worn, or damaged, they should clean up, repair or replace them in a timely manner.
The comprehensive law enforcement agency for urban management is responsible for the supervision and inspection of vehicle body markings, corrects irregularities in a timely manner, and investigates and punishes illegal acts in accordance with the law.
In addition, various social units or individuals can also supervise the setting of car body signs through the scheme disclosed by the comprehensive service information system.
Failure to make changes within the time limit will result in a fine of 2,000 yuan
As the city's local regulations, the "Beijing Regulations on the Administration of the Installation of Outdoor Advertising Facilities, Plaques, Signs and Slogans" was officially implemented in September last year.
The regulations clearly stipulate that if the body of motor vehicles and non-motor vehicles is sprayed or pasted with the name of the unit, enterprise logo, telephone number, address, website and other logos, it shall comply with the requirements of this Municipality's management specifications for the installation of body signs, and comply with the national and municipal traffic safety requirements. , The relevant requirements of vehicle management shall not affect the driving safety and vehicle identification.
This time, the management specification for the setting of body markings for public opinion is formulated to implement this regulation and further standardize the setting of vehicle markings.
In the future, violations of body markings will be punished accordingly.
For example, if the body marking does not meet the requirements, the comprehensive law enforcement agency of urban management will order it to make corrections within a time limit; if it fails to make corrections within the time limit, a fine of 2,000 yuan per vehicle will be imposed.
Those affecting safe driving shall be investigated and punished by the traffic management department of the public security organ according to law.
Those who fail to set up outdoor advertisements on the bodies of buses and trams in accordance with the plan for setting up outdoor advertisements on the bodies of buses and trams, or set up advertisements on the bodies of non-bus and tram bodies, shall be ordered by the comprehensive law enforcement agency of urban management to make corrections within a time limit.
Those who fail to make corrections within the time limit shall be fined 5,000 yuan per vehicle.
Those that affect safe driving shall be investigated and punished by the traffic management department of the public security organ according to law.