The editorial staff of 20 Minutes did not participate in the production of this article.

Whether it is to print your own creations or to print a part to repair a device, 3D printers are really becoming accessible to everyone.

Formerly reserved for professionals, they are now available from €200 and allow you to bring your ideas to life.

Using 3D modeling software, prepare your files and start printing your objects.

If some models are still quite expensive, it is possible to find models compact enough to take place on a desk.

Of course, the larger the device, the more it will be able to print large parts.

This is one of the points to remember before making your choice.

Selection of the best 3D printers in 2022

  • Voxelab Aquila: a model for less than €200

  • Comgrow Creality Ender 3: ideal for beginners in 3D printing

  • FlashForge Dreamer: autonomous thanks to a wifi connection

  • Creality Ender 6: a fast model

  • Elegoo Saturn MSLA: a compact 3D printer

  • Creality CR10: a wide bed for printing large models

  • Dremel 3D45: equipped with an HD camera

  • Flashforge Adventurer 3: an accurate and detailed impression

  • Creality Ender 5 Pro: silent and efficient

  • Anycubic Mega Pro: a benchmark in the 3D printing market

Voxelab Aquila: a model for less than €200

It is now possible to afford a 3D printer of good quality for less than 200 € as shown by this model proposed by Voxelab.

It has a heating bed composed of a carbon crystal silicon plate.

An interesting compromise in this price range to obtain good grip.

It turns out to be rather quiet in the printing phase with only 50 dB raised.

It allows the use of different software such as Voxel Print or Cura.

Most :

  • Simple and functional

The lessers :

  •  Fairly slow printing

See the price on Amazon

Comgrow Creality Ender 3: ideal for beginners in 3D printing

With this 3D printer, you will enjoy a good size print bed.

You will be able to print objects up to 22 cm square on a maximum height of 25 cm.

If speed isn't its forte, it does deliver beautiful definition to your prints thanks to a precise nozzle.

It also has the advantage of being able to resume printing exactly where it was interrupted in the event of a power outage.

Most :

  • Resuming printing in the event of an outage

  • Precise 3D printing

The lessers :

  •  Speed ​​is not included in the price

See the price on eBay

See the price on Amazon

FlashForge Dreamer: autonomous thanks to a wifi connection

Change of range with this closed model from FlashForge.

It has a dual extruder for precise printing.

The Dreamer offers a good resolution, but its printing surface is quite limited with 23 cm long by 15 cm wide and 14 cm high.

It is ideal for printing small parts, but with great precision.

It is also quite quiet with its closed design.

It comes with 500g of PLA filament spools.

Most :

  • Double extruder nozzle

The lessers :

  •  Significant weight (11 kg)

See the price on Amazon

Creality Ender 6: a fast model

The Ender 6 comes with many advantages.

It has a high printing volume with a heated plate that can accommodate a part of 25 cm side by 40 cm high.

Particularly silent, it is also much faster than many competitors.

If it is closed, its glass walls make it possible to monitor the printing as it progresses.

It is equipped with a 4.3“ touch screen to control its functions.

The whole thing offers a pleasant and serious design.

Most :

  • Fast and quiet

The lessers :

  •  High price

See the price on Amazon

See the price at Cdiscount

Elegoo Saturn MSLA: a compact 3D printer

If you are looking for a model capable of producing your prints with high quality without having to print large parts, the Saturn MSLA is a good choice.

Its operation ensures greater regularity and high precision.

It has an anti-aliasing feature for a smoother appearance of complex or rounded parts.

Most :

  • Print quality

The lessers :

  •  High price for possible print size

See the price on Amazon

Creality CR10: a wide bed for printing large models

This model is for those looking for a 3D printer capable of printing in large dimensions.

This model offers a volume of 30 cm per side and up to 40 cm in height.

Its design allows smooth work for smooth and precise printing.

To ensure the stability of the whole, given its significant height, the printer is equipped with a traction bar to reduce the risk of vibration.

A highly efficient model for demanding users.

Most :

  • Large print volume

The lessers :

  •  Cables too short for the remote control box

See the price on Amazon

See the price at Cdiscount

Dremel DigiLab 3D 3D45: equipped with an HD camera

The precision tool specialist Dremel offers here a fairly expensive 3D printer, but a guarantee of quality.

It has a color touch screen to control its functions.

It is equipped with wifi to communicate wirelessly with your computer.

And to be able to monitor the print, Dremel has integrated an HD camera.

It features RFID filament type detection to distinguish between eco-ABS, PLA, PETG and Nylon.

Its heating plate reaches 100°C and its printing nozzle can go up to 280°C.

Most :

  • Professional quality accessible to the general public

The lessers :

  •  Price

See the price on Amazon

See the price at Darty

Flashforge Adventurer 3: an accurate and detailed impression

The Adventurer 3 is an advanced model.

It allows you to choose the printing nozzle according to the filament used.

Its dismantling is done with a simple pressure to go from a wire of 0.3 to 0.6 mm.

This also allows you to obtain the ideal temperature between 240 and 265°C depending on the type of filament.

This closed model offers a cubic print volume of 15 cm per side.

The tray can heat up to 100°C.

It is flexible to facilitate the removal of your object without deterioration.

Most :

  • 4 nozzles supplied

The lessers :

  •  Reduced print volume

See the price on Amazon

Creality Ender 5 Pro: silent and efficient

Taking advantage of an evolution of its motherboard, this model is quieter than the previous generation while offering better print quality.

Its metal nozzle exerts effective pressure on the filament for greater print finesse.

Its hot bed reaches 110°C in just 5 minutes.

It will also delight DIY enthusiasts.

It comes partially assembled, which makes it easier to understand how it works.

Most :

  • Value for money

The lessers :

  •  Open model

See the price on Amazon

See the price at Cdiscount

Anycubic Mega Pro: a benchmark in the 3D printing market

This model offers an original double functionality.

It is above all a 3D printer, but it also allows laser engraving.

The print volume is 21 cm side by 20.5 cm high.

The engraving area is 22 x 14 cm.

It allows the use of files in .stl, .obj, .dae and .amf formats.

Its nozzle uses wire up to 0.4 mm.

The printing speed is not the fastest of the selection, but its versatility makes it a real asset, especially since its price remains reasonable.

Most :

  • 2 in 1 printer

The lessers :

  •  Tray adjustment to be reviewed

See the price on Amazon

See the price at Darty

Why buy a 3D printer in 2022?

3D printing is ideal for making your own figurines, making everyday objects adapted to specific needs without having to limit yourself to the overly generic models available on the market.

Phone holders, spare parts of a device, everything is possible with a little patience.

Creative people appreciate being able to bring their idea to life.

How to choose a 3D printer?

Between the budget and the volume of printing, it will often be necessary to make a choice.

First of all, you have to think about how you will use your 3D printer.

If you dream of printing figurines of your heroes in large size, even in several parts, you will have to take the dimensions into account.

If you want to make technical objects to improve your daily life, a more precise model, but offering a reduced print volume, may be relevant.

3D printing is now accessible to everyone.

With models under €200, discover this new, innovative and creative universe.

Relatively easy to use, you can use templates available on the internet to print all types of objects or make your own creations.

Purchase guide

Xiaomi smartphone: Which is the best model?

Purchase guide

What is the best motherboard to choose?

Content offered by our tips experts, partners of 20 Minutes.

The editorial staff did not participate in its realization.

The prices mentioned in this article are indicative and are subject to change.


Some links in this article are affiliate links, which may use tracers to enable 20 Minutes to receive a commission in the event of a purchase on the partner site.

  • high tech

  • Purchase guide

  • 0 share

    • Share on Messenger

    • Share on Facebook

    • Share on Twitter

    • Share on Flipboard

    • Share on Pinterest

    • Share on Linkedin

    • Send by Mail

  • To safeguard

  • A fault ?

  • To print

Keywords: